Attachment Instructions & Explanations
for
Shell Decoys and Full Body Decoys
|
Universal Motion Master for Shell Decoys
" January 2008 Product of the Month"
awarded by Hunt Fish Cook.com
|
|
After attaching head of your
decoy to the body,
find the balance point
of the decoy by placing
it on your finger ;
mark the blance point
with a permanent marker.
|
| Place the two small HD velcro
strips on either side of the
balance point and the two
larger HD velcro strips on
the outside edge of the two
smaller ones. Use both the
HD Glue provided and the
sticky back of velcro to
attach a permanent bond
to the decoy. For best results
let it set up overnight.
As you can see, decoys
remain stackable !
|
| Place the Velcro backed
Universal Motion Master
top piece unto the velcro
strips on decoy, so that
the top piece is centered
on the balance point
you marked.
Adjust the UMM top
piece forward or backward
to give your decoy its best
stance position.
As you can see, these
adjustments allow for many
variations in
decoy styles and designs.
|
| Insert pointed"h" side of the
cold rolled steel stake into
the ground by stepping on
the horizontal part of the
"h", so that it is planted
securely in the ground.
Place the decoy with the
UMM top piece attached
over the the stake and
press down gently, but
firmly, so that the
stopper on the stake
seats firmly into the
funnel.
The wind and the UMM
will do the rest.
|
Universal Motion Master for Full Body Decoys
" January 2008 Product of the Month"
awarded by Hunt Fish Cook.com
|
Universal Motion Master for Carry-lite Full Body Decoys
attaches the same way but inside the decoy, so that
the UMM top piece remains in the decoy and all that is
necessary at the time of decoy placement in the field is to
plant the 4-pronged cold rolled steel stake securley
in the ground and affix the hex head connection
of the stake to its mate protruding just below the decoy
and let the Universal Motion Master and the wind do its job.
Great life-like action, simple field set up and take down !
|
Universal Motion Master for other Full Body Decoys
like Greenhead Gear FFD Elites, other Avery decoys,
and Bigfoots
attaches the same way but inside the decoy, so that
the UMM top piece remains in the decoy and all that is
necessary at the time of decoy placement in the field is to
plant the 4-pronged cold rolled steel stake securley
in the ground and place the decoy (without the feet) over
the stake so the stopper seats into the funnel of the
UMM. Then press down gently, but firmly,
and let the Universal Motion Master and the wind do its job.
Great life-like action, simple field set up and take down !
(Note! The Bigfoot does not have a factory hole on its belly,
so remove the feet & leg assembly, and cut out the
2 1/4 inch circle on the decoys belly at the center of
where the feet would attach. This creates a center hole
in the decoys inner cavity without compromising the
decoy, so feet can still be used if desired. Place the stake
up thru this new hole that we just created,
without using the UMM top piece. Instead use the
special velcro motion control ; attaching the stake to
bottom side of the decoy. You won't believe the
life-like motion of this decoy in the wind .....and how
securly this decoy is planted in the ground ! )
|
Geese II Motion
First place the decoy so the stake enters the
3/4 to 1 inch hole on the underside of the decoy.
The decoy pivots on this leg and the second leg
controls the wind motion. Attach the velcro pad
at the top of Specialized Leg # 2 to the
underside of the decoy where you have
attached the mate white velcro.
The Wind, Leg #1 and Specialized Leg #2 do the rest.
As you can see on our motion video, the resulting
motion is extremely realistic... and decoy
set-up and take down is extremely easy.
|
|
